Simulator Instructor (Fort Lauderdale)

Seeking part-time and full-time maritime instructors to teach maritime courses including IBS, BRM/CRM, Ship Handling and ECDIS. Experience on Sperry and/or NACOS Integrated Bridge Systems is preferred. DP experience a plus. Qualifications: Current Merchant Marine License required, prefer the equivalent of Chief Mate of Any Gross Tons –Oceans or above and STCW Certificate.
Experience in course instruction, curriculum development and Train-the-Trainer qualification a plus for this position.
Added October 31 2011

Maritime Simulator Operator (Fort Lauderdale)

Seeking part-time and full-time maritime simulator operator for navigational simulators.

Qualifications: Current Merchant Marine License required, prefer the equivalent of 500 Gross Tons or above and STCW Certificate. Candidate should have experience in shipboard communications, deck operations and electronic navigation.
Proficiency with personal computer usage is required and standard office automation experience is highly preferred.
Added October 31 2011

Maritime Simulator Technician (Fort Lauderdale)

Seeking full-time technical support personnel responsible for maintaining, troubleshooting and repairing network and hardware equipment in a maritime simulation environment.

Qualifications: Technical degree in computer science, or equivalent skill gained through experience coupled with five or more years of experience in systems support. Should have experience in the troubleshooting and repair of networks, computers, projectors/monitors, marine electronics (RADAR, ECDIS, Gyro, and VHF/UHF) and associated software and hardware. Maritime experience a plus.
Added October 31 2011

Quality Safety Administrator (Fort Lauderdale)

Seeking an experienced Quality Safety Administrator. Applicant will be expected to refine and develop corporate and project health & safety programs to establish a total safety corporate culture. "Hands-on" inolvement and oversight of project safety will be required. Applicants must have:

• working knowledge of USCG, OSHA and other regs and experience in the administration/management of safety/quality programs.
• experience as a safety instructor

STCW Course Instructor (Fort Lauderdale)

Resolve Marine Group seeks a local professional mariner local with both small boat experience and instructor capabilities for STCW Personal Survival, PSSR and First Aid, and Fast Rescue Boat courses. Instructor Skills/Experience: confident with public speaking; operate up to 8 meter O/B & jet-drive vessels; I/B vessels up to 13 meters; RHIB's; towing large, heavy trailers; good driving record.
License: USCG Master 500t or greater; experience on vessel with Fast Rescue Boat.
Added October 31 2011

Junior Naval Architects/Marine Engineers

Resolve Engineering Group (REG) is looking for several energetic, enthusiastic junior naval architects and marine engineers to build up our New Orleans office. REG offers a full range of engineering services supporting operators and shipyards on a variety of projects, with offices located at the foot of Canal Street in downtown New Orleans. Arrange for an interview today. Visit REG-NOLA and see first hand what an exciting career may lie ahead for you. The ideal candidate will be hands on and ready to do whatever is needed to provide our clients with the right solution. You will work on stability, structure, outfitting, arrangements, piping systems, and machinery installations for both new construction and repairs and modifications. You will become familiar with ABS, USCG, and international regulations. The position is primarily in the office, but there are opportunities to perform shipchecks and meet with clients at their operations to allow you to see first hand the results of your work. Candidates should have a relevant bachelor degree from an accredited college.
Added October 10 2011

Junior Naval Architect

Resolve Marine Group is looking for an energetic, enthusiastic junior naval architect to send out on salvage jobs and learn the ropes from the ground up. The ideal candidate will be hands on and prepared to get into the thick of the mud, grime, and work that it takes to be a salvage guy. Position is based in Fort Lauderdale, but requires travel on short notice to wherever in the world the salvage is occurring. You will have the opportunity to see the real world with what can happen to ships and what is necessary to fix the problem.
Added October 10 2011

Mid-Level Marine Engineer

RESOLVE Engineering Group, New Orleans Office: The ideal candidate will have a BS degree in Naval Architecture, Mechanical Engineering and/or Marine Engineering. Position requirements include:

• At least 5 years design engineering experience.
• Proven ability to design and arrange commercial vessel systems (fuel oil, compressed air, bilge, ballast, fire main, HVAC, etc.) is required.
• Experience supporting common shipyard activities such as installation, repairs, and vessel inspections.
• Familiarity with USCG and ABS regulations as well as experience with AutoCAD and Rhino.
• Service as a licensed operating engineer at sea is a plus.

Work will primarily be in an office environment (5 days per week typically) with occasional travel for inspections and testing. The successful candidate will have excellent writing skills and will be able to work both independently and with a team. A career-oriented individual will have passed the Fundamentals of Engineering exam and may already have a PE license. Proof of eligibility to work in the USA is a requirement. No second party referrals or contact, please.
This is a permanent position. Resolve Engineering Group offers medical, vision, 401(k), sick leave, holidays and vacation. Resolve Engineering Group, LLC is an equal opportunity employer committed to a culturally diverse workforce. M/F/D/V.
Added September 20 2011

Crane Mechanic

Mechanic to look after internal heavy lift assets: Terex, RT-60, American 999, American 11320, American 9310, 400 Manitowac. Capable of troubleshooting, setting up, and implementing planned maintenance schedule for cranes. Based in Theodore, AL. Excellent opportunity for the right team player.

Diving Equipment Coordinator

Inventory of diving equipment, company wide/Repair & maintenance of diving equipment, including helmets & gear/Prepare dive packages/Industry experience necessary.

Captains

Tug captains (all tonnage) for work in Gulf, East Coast and Caribbean.

Crane Operator

Experienced crane operator (5+ years) Manitowoc and American Cranes.
Must have floating barge experience.

Marine Diesel Mechanic

Experience with marine diesels (Detroit Diesel preferred), fuel systems, hydraulics, generators, various shipboard systems on vessels 200ft in length + cranes & heavy equipment. Welding a plus.

Divers (certified)

All levels required to support near shore and off shore salvage operations.

Engineers

Chief Engineer or DDE Unlimited For diesel powered vessels, 6000hp, Salvage & Towing vessel. Solid EMD experience essential. Must be a U.S. citizen holding current USCG license, STCW, MMD and have a current passport.
Port Engineer Seeking a hands on Port Engineer for our Theodore, AL location, to manage marine assets, incl: barges, cranes, heavy equip, etc. Shipboard engine or shipyard experience required.
Assistant Engineer Licensed Assistant Engineer on diesel powered vessels, 6000hp, EMD engines. Some EMD experience preferred.

Mate

USCG Mate 100 ton or greater with tow experience, for work in Gulf, East Coast and Caribbean.

Salvage Technician/Laborer

Laborer and salvage technican duties with marine salvage experience preferable.

Lead Welder

Minimum 10 years experience, Also require welder, minimum 5 + years experience. Shipyard experience preferred.